[EDI] How do I connect a monitor to ECcom software?
This article discusses how to connect a monitor to ECcom software.
The video below demonstrates how to connect to an MMU2 monitor using EDI’s ECcom software and configure its network settings.
- Discover the monitor: Open ECcom, navigate to Setup → Config → LAN, and search for connected devices. The monitor should appear with its MAC address when detected.
- Configure the device: Select the monitor with a single click and choose Config Device to view or change its IP address.
- Use a web browser: Enter the monitor’s IP address in a browser to access its administrative setup page.
- Manage network settings: From the browser interface, you can change the IP address and configure the username and password.
- Default credentials: The video states that the monitor ships without a password set, unless one has been configured.
ECcom can discover and configure an MMU2 monitor over a LAN, while the browser interface provides an alternative way to manage its IP address and login settings.
Set a strong administrative password before deploying the monitor on a production network.