ATSI Test Set Up For Older EDI NEMA Monitors NSM or SSM

Setup The NSM 3, 6 or 12 Monitor For An ATSI Test

1. Min Flash dip switches 4, 2, and 1 should be on. Switch labeled 8 should be off.
2. On the ATSI PCMT- 8000 Test Manager software settings, go to test settings and set the correct test standard(NEMA TS1) and monitor type (3, 6, 12, or 18)

Setup The NSM 3E, 6E or 12E Monitor For An ATSI Test

1. Min Flash dip switches 4, 2, and 1 should be on. Switch labeled 8 should be off.
2. All “OPTIONS” switches should be all off.
3. All SSM ENABLE switches should be on.
4. On the ATSI PCMT- 8000 Test Manager software settings, go to test settings and set the correct test standard (NEMA TS1) and monitor type (3, 6, or 12).

Setup The SSM 6LE, SSM 12LE or SSM 18LE Monitor For An ATSI Test

1. The Flash dip switches 4, 2, and 1 should be on. Switch labeled 8 should be off.
2. Both Dual SEL Switches is should be on.
3. All “OPTIONS” switches should be all off.
4. All SSM ENABLE switches should be on.
5. On the ATSI PCMT- 8000 Test Manager software settings, go to test settings and set the correct test standard (NEMA TS1) and monitor type (3, 6, 12, or 18)

Setup The SSM 6LE, 12LE, 16LE

1. The Flash dip switches 4, 2, and 1 should be on. Switch labeled 8 should be off.
2. All FYA switches should be off.
3. All “OPTIONS” switches should be all off.
4. All SSM ENABLE switches should be on.
5. On the ATSI PCMT- 8000 Test Manager software settings, go to test settings and set the correct test standard (NEMA TS1) and monitor type (6, 12, or 16).

Setup The MMU-16E Monitor For An ATSI Test

1. All “OPTIONS” switches should be all off.
2. All FIELD CHECK/DUAL ENABLE switches should be on.
3. On the ATSI PCMT- 8000 Test Manager software settings, go to test settings and set the correct test standard (NEMA TS2) and monitor type (12, or 16).